/ How to make a luminous liquid?

How to make a luminous liquid?

Everyone perfectly understands that the liquid in the darkGlows for a reason. It is likely that some specific chemical processes occur in it. Do not go deep into chemistry, you just have to take it for granted that in oxygen certain substances begin to emit light rays. For this reason, so that everything went as it should, should be stocked with certain reagents. There are several recipes for making a glowing liquid.
  1. Take 2-3 grams of luminol, 80 milliliters3 per cent hydrogen peroxide, 100 milliliters of water, 10 milliliters of sodium hydroxide solution, dyes fluorescent (rubren or something like that), as well as test tubes. Luminol is a powder of yellow color, starting in neutral and acidic solutions to emit light blue. The first thing to do is to pour water into the flask and dissolve the luminol in it. After this, add hydrogen peroxide to the flask. There should also send iron chlorine or copper sulfate. If nothing like this, then you can use improvised means. You can squeeze a few drops of blood from the chicken thigh, dilute it in water and add 1 tablespoon of this solution to the one that is in the flask. After this, add caustic soda, stir with a wooden stick and admire the amazing glow of the blue color, which will come from the bulb. If you do not like the blue color, then you can add a little of any fluorescent dye to the solution.
  2. It should take 0.15 grams of luminol, 35 gramsDry alkali, 30 millimeters of dimexide, a flask with a test tube of 500 milliliters in volume, and a fluorescent dye. It is necessary to mix luminol, dimexide, and alkali in the flask. After this, the flask must be closed and shaken. A blue glow will appear, which can be repainted if desired. To do this, add to the composition of a little any fluorescent dye. When the luminescence is weakened, you need to open the lid, let in a little air into the flask.
  3. Take one tall glass, 20 millilitersWashing powder solution, 10 milliliters of 3 per cent hydrogen peroxide, 5 milliliters of a 3 per cent solution of luminol, several crystals of potassium permanganate. It is necessary to pour a solution of detergent into the glass, hydrogen peroxide, as well as a solution of luminol. Separately need to grind a few crystals of potassium permanganate and also send them to a glass. With mixing, the mixture will start to foam, and it will be very beautiful to spark.
At the end of the experiments, the house will needClean and wash the dishes. However, this process can be done fascinating if the room is slightly pritenit, when exposed to water chlorinated water, the luminol solution starts to glow.

Luminol can also be manufactured independently inHome conditions. One gram of coniferous concentrate (it can be purchased at a pharmacy) should be dissolved in water. After this, take a spoon and put a small amount of boric acid on it. One drop should be added to the spoon with a solution of coniferous concentrate and carefully all you need to mix. After that, the solution should be boiled over the fire until the solution boils in the spoon. It is necessary to pierce the bubbles with something sharp. Then the mixture should be cooled and add a little more solution to it and then warm it again. As a result, the substance will turn yellow - a phosphor. After being in the bright light, it will glow in the dark, but not for long, only a couple of seconds.
Pay attention to: